Precautions for cleaning advertising engraving machine
Source：本站Time：2024/3/13 9:15:42
When cleaning an advertising engraving machine, the following points should be noted:
1. Turn off the power and water sources to ensure that the machine is in a safe state.
2. Use a soft cloth or sponge for cleaning, avoid using hard brushes or metal to prevent scratching the surface of the machine.
3. When cleaning, avoid letting water enter the interior of the machine to avoid affecting its normal operation.
4. After cleaning, dry the surface and interior of the machine to avoid water stains and moisture affecting its performance.
5. Regularly perform deep cleaning, including cleaning the rollers, guide rails, bearings, and other parts of the machine to maintain normal operation.
相關(guān)資訊：
- Common knowledge of vibration engraving machine
- What precautions should be taken for side hole machines
- What are the common faults of the edge inspection vibrating knife integrated machine
- Introduction to the integrated machine of edge inspection vibration knife
- Common knowledge of edge inspection vibration knife integrated machine
- Introduction to Side Hole Machine
- What should be noted for automotive mold machines